Glas-Col’s Digital Pulse Mixer is capable of performing high or low speed pulse orbital mixing for Sample Prep Work and most other applications. This unit is able to accomodate a wide variety of glassware, racks, well plates or reactor blocks for accurate, repeatable results. The microprocessor based control technology allows for display of speed, multi-function timer, and pulse profiling. Using the USB communications port and available LabNetix® software package, several units can be controlled through your personal computer.

·Speed 150 to 1500 rpm, Speed Display Resolution: 1.0 RPM. Speed setting increment: 10 RPM

·4 line back lit LCD display

·Offset: 0.070"

·Built in digital timer (seconds: 1-60, minutes 1-60, hours 1-24)

·Preset run times of 30,60,90 and 120 seconds

·User selectable pulse profile

·USB Communication Port

·User friendly membrane switch interface (4 button)

·Electrical: 5 ft, 3 wire grounded cord and on/off power switch.

·Load Capacity: Maximum of 8 lbs at lower speeds

·Size: 16"w x 18"d x 17"h

·Platform: 11 5/8" x 14 1/4"