密三糖或棉子糖/蔗糖/D-半乳糖检测试剂盒

英文名：Raffinose/Sucrose/D-Glucose Assay Kit

货号：K-RAFGL

规格：120 assays of each per kit

The Raffinose/Sucrose/D-Glucose test kit is for the measurement and analysis of D-glucose, sucrose and raffinose, stachyose and verbascose in seeds and seed meals. Based on the measurement of D-glucose on enzymic hydrolysis of raffinose, stachyose and verbascose to D-glucose, D-fructose and D-galactose.

Colourimetric method for the determination of Raffinose (also stachyose and verbascose), Sucrose and D-Glucose in legume seeds, plant materials, foodstuffs and feed Principle: (α-galactosidase) (1) Raffinose + stachyose + verbascose + H₂O → D-galactose + sucrose (invertase) (2) Sucrose + H₂O → D-glucose + D-fructose (glucose oxidase) (3) D-Glucose + H₂O + O₂ → D-gluconate + H₂O₂ (peroxidase) (4) 2H₂O2 + p-hydroxybenzoic acid + 4-aminoantipyrine → quinoneimine + 4H₂O

Kit size: 120 assaysMethod: Spectrophotometric at 510 nmReaction time: ~ 20 minDetection limit: 100 mg/LApplication examples: Analysis of grain legumes and other materials containing raffinose,stachyose and verbascoseMethod recognition: Used and accepted in food analysis

Advantages

• Very competitive price (cost per test)
• All reagents stable for > 2 years after preparation
• Simple format
• Rapid reaction
• Mega-Calc™ software tool is available from our website for hassle-free raw data processing
• Standard included

Q1. Should the pH of the sample be adjusted even for samples in acidic media

The pH of the assay solution after the sample is added should be the same as that of the assay buffer that is supplied with the kit. Low sample volumes (e.g. 0.1 mL) are not likely to affect the pH of the assay solution and therefore may not require pH adjustment. Samples above 0.1 mL are more likely to affect the pH of the assay solution and therefore the pH of these samples should be adjusted as described in the data booklet, prior to addition to the assay.

Q2. There is an issue with the performance of the kit; the results are not as expected.

If you suspect that the Megazyme test kit is not performing as expected such that expected results are not obtained please do the following:

1. Ensure that you have tested the standard sample that is supplied with the Megazyme test kit.
2. Send the results of the kit standard, blank samples and the results obtained for your sample, in the relevant MegaCalc spreadsheet (if available) to Megazyme (cs@megazyme.com). Where available the relevant MegaCalc spreadsheet can be downloaded from where the product appears on the Megazyme website.
3. State the kit lot number being used (this is found on the outside of the kit box).
4. State which assay format was used (refer to the relevant page in the kit booklet if necessary).
5. State exact details of any modifications to the standard procedure that is provided by Megazyme.
6. State the sample type and describe the sample preparation steps if applicable.